this is manual ospf command in mikrotik. for more complete you can visit mikrotik.com
Submenu level: /routing ospf
Description
In this section you will learn how to configure basic OSPF settings.
Property Description
distribute-default (never | if-installed-as-type-1 | if-installed-as-type-2 | always-as-type-1 | always-as-type-2; default: never) - specifies how to distribute default route. Should be used for ABR (Area Border router) or ASBR (Autonomous System boundary router) settings
never - do not send own default route to other routers
if-installed-as-type-1 - send the default route with type 1 metric only if it has been installed (a static default route, or route added by DHCP, PPP, etc.)
if-installed-as-type-2 - send the default route with type 2 metric only if it has been installed (a static default route, or route added by DHCP, PPP, etc.)
always-as-type-1 - always send the default route with type 1 metric
always-as-type-2 - always send the default route with type 2 metric
metric-bgp (integer; default: 20) - specifies the cost of the routes learned from BGP protocol
metric-connected (integer; default: 20) - specifies the cost of the routes to directly connected networks
metric-default (integer; default: 1) - specifies the cost of the default route
metric-rip (integer; default: 20) - specifies the cost of the routes learned from RIP protocol
metric-static (integer; default: 20) - specifies the cost of the static routes
redistribute-bgp (as-type-1 | as-type-2 | no; default: no) - with this setting enabled the router will redistribute the information about all routes learned by the BGP protocol
redistribute-connected (as-type-1 | as-type-2 | no; default: no) - if set, the router will redistribute the information about all connected routes, i.e., routes to directly reachable networks
redistribute-rip (as-type-1 | as-type-2 | no; default: no) - with this setting enabled the router will redistribute the information about all routes learned by the RIP protocol
redistribute-static (as-type-1 | as-type-2 | no; default: no) - if set, the router will redistribute the information about all static routes added to its routing database, i.e., routes that have been created using the /ip route add command
router-id (IP address; default: 0.0.0.0) - OSPF Router ID. If not specified, OSPF uses the largest IP address configured on the interfaces as its router ID
ospf mikrotik command
